Specs | US3052 | Fixed Ground Mount
|Fixed Ground Mount|
|Model Name||Fixed Ground Mount|
|Material||Bracket (polypropylene), screws/washers (stainless steel), plugs (plastic)|
|Dimensions||L9in x W9in x D9in|
|Compatible With||HOSELINK 50ft & 82ft Retractable Hose Reels|
|Assembly Required||Yes (you will need a drill)|
Electric hammer or rotary drill with a 12mm masonry bit for brick or masonry OR electric drill with a 5mm timber bit for timber; hammer; socket set (10mm bit)
Brick or Masonry:
Drill 4 holes with electric hammer or rotary drill (using marked holes) with 12mm masonry bit, 2.5inches deep. Hammer in the 4 plugs. Attach the Fixed Ground Mount using the 4 screws & washers.
Tip for drilling brick or masonry: Mark and drill two holes. Line up the Fixed Ground Mount on the two drilled holes then mark the next two. Once marked, drill the final two holes. This method helps to get the alignment right.
Mark and drill 4 holes with a 5mm timber drill bit, 2.5" deep. Attach the Fixed Ground Mount using the 4 screws & washers. No plugs required.